Prepare tapes for use with an autochanger device

For tape autochangers, you must prepare new tapes before they can be used for the first time. The prepare option removes any existing data and formats the media. After you have written data to the media, you can also use this procedure to erase all backup copies.

WARNING!  Use this option with caution. Any existing data is permanently deleted from the media.

To prepare tape media:

1.  Load the tape(s) you want to prepare.

2.  On the Configure > Appliances page, select your appliance.

3.  Click the Backup Copy Targets tab below.

4.  Click Scan for Media

5.  Select the autochanger in the list.

6.  Click Prepare.

7.  (Optional) Enter a Media Label.

●   The label can contain up to 12 alphanumeric characters or underscores.

●   If you do not enter a label, the appliance generates one for you.

8.  Enter the Slots whose tapes will be prepared. Enter slot numbers using a comma-separated list and/or ranges. Example: 1,2,3,5-8

9.  Click Prepare. The appliance permanently deletes any existing data and formats the media with the Unitrends file system.