Swap out drives in a multi-drive Recovery Archive unit

You can swap out drives as needed, without powering down your Recovery Archive unit. Before swapping drives, note these considerations for using a device with multiple drives:

●   All drives attached to a single appliance must have equal capacity. Drives may be of varying capacity if they are attached to different appliances.

●   Within the backup copy target, all drives attached to a single appliance are treated as one logical device. When you add a multi-drive device and initialize the drives, the appliance formats them as a single unit. Data is then written across all drives as if they are one larger drive. Once you copy backups to the device, these drives must be treated as a single entity. You must remove them as a set and, to recover data, you must insert all drives in the set back into the eSATA or USB device so the appliance can read and import backup data. If you separate a drive from the set, all data is lost.

Swap out a drive in an eSATA or USB dock

1.  Power down the dock.

2.  Swap the drive.

3.  Power on the dock.